Talawade, Pune, Maharashtra
- GST NO. : 27AHOPD0404E1ZW
Products
The reactor is the generic term for a type of vessel widely used in the process industries. since vessels of this type are used for a variety of process operations such as solids dissolution, product mixing, chemical reactions, batch distillation, crystallization, liquid/liquid extraction and polymerization. A typical batch reactor consists of a tank with an agitator and integral heating/cooling system. These vessels may vary in size from less than 1 liter to more than 50,000 liters. They are usually fabricated in steel, stainless steel, glass lined steel, glass or exotic alloy. Liquids and solids are usually charged via connections in the top cover of the reactor. Vapors and gases also discharge through connections in the top. Liquids are usually discharged out of the bottom. The advantages of the batch reactor lie with its versatility. A single vessel can carry out a sequence of different operations without the need to break containment. We provide Reactors with sealing arrangements as Mechanical Seals, Stuffing Box with /without cooling arrangements. We are a chemical reactor manufacturer for Chemical, Pharma and other industries.
We are a chemical reactor manufacturer for Chemical, Pharma and other industries.
Type of Reactors we fabricate : As per client process demand we fabricate, Chemical Reactor, Limpeted Reactor, Jacketed Reactor, Mixing Vessel ,Agitator Reactor,S S Reactor, Pharma Reactor,GMP Reactor,Polymer Reactor,Chemical agitator reactor ,Limpet Coil Reactor. Our customers are spared across the world.
In a Blender, a long complicated single paddle is mounted axially and used to disperse the ingredients of the mixture. The ribbon is usually so constructed that the powder near the outside of the container is moved in one direction, whereas in the middle it is moved in the opposite direction. Ribbon mixer are available from several manufacturers and they all have their own type of ribbon. The reader should note that many of the companies mentioned with respect to a particular type of mixer in the discussion often make other type of mixers, as set out in their catalogs.
INDUSTRIAL USE
Ribbon mixers are a basic industrial mixing tool. They consist, basically, of a trough-shaped casing (usually 2 to 3 times longer than it is wide) with a semicircular bottom, fitted with a horizontal longitudinal shaft on which are mounted arms supporting a combination of ribbon blades, paddles or helical screws set at a fairly close clearance to the semicircular mixer body so that no layer of material remains on the bottom of the mixer. The most effective design of ribbon layout is the double spiral in which the outer ribbon moves the product in one direction and the inner ribbon moves it in the opposite direction. This creates axial flow and prevents any buildup of material moved by the blades as they rotate is relatively small so that mixing times can be long. The capacity of the mixer should not be exceeded otherwise the ribbon and/or blades are not effective and the surface layers of the powder do not get adequately mixed.
- Ribbon mixers are normally operated at room temperature but they may be jacketed for steam heating (at atmospheric pressure)or water cooling, should this be called for .
- Although ribbon mixers are relatively standard in design there are many modifications and commercial design options available depending on:
- materials characteristics
- production requirements, particularly batch size and working conditions
machine characteristic such as loading and unloading facilities
One does not normally fill this type of mixer to more than 50% of the available volume. Normally the capacity of this type of mixer is restricted to an upper limit of 15 m.
Sometimes, to improve the dispersion of ingredients in ribbon mixers, the ribbon blades are built to be close to the cylindrical wall to give high shearing. Sometimes the ribbons are also fitted with rubber wipers to ensure complete intermingling of the ingredients by lifting any packed material near the wall into the middle of the ribbon ensemble. It is difficult to predict the scale-up performance if one attempts to increase mixing capacity by going to a larger mixer of the same type.
Type of Blenders we fabricate:
As per client process demand we fabricate, Ribbon Blenders, Double cone blender, Octazonal blender and Cone blender our customers are spared across the world.
Industrial Mixers are machines that blend, emulsify, homogenize or otherwise mix material into a single substance. Mixers thoroughly combine virtually any solid or liquid that is necessary to form a final product.
They're used throughout many industries during the manufacturing or processing period. Their powerful motors and blades allow mixers to work with a variety of materials. These machines are widely used across many industries including the cosmetic, pharmaceutical, research, and lab, chemical, agriculture, food and beverage, pulp and paper, automotive, water treatment, adhesive and sealant industries.
Over the last hundred years, mixers have improved effectiveness, efficiency, and versatility. They’ve also come to be able to take a considerable amount of material at once, without wearing down.
Type of Mixer we fabricate :
As per client process demand we fabricate Pulverizer Mixer, Paddle Mixer, Twin Shaft Mixer, and Sigma Mixer. our customers are spared across the world.
Industrial dryers are used to efficiently process large quantities of bulk materials that need reduced moisture levels. Depending on the amount and the makeup of material needing to be dried, industrial dryers come in many different models constructed specifically for the type and quantity of material to be processed. The most common types of industrial dryers are fluidized bed dryers, rotary dryers, Atmospheric tray dryer, vacuum tray dryer, Fluid bed Tray dryer, Rotocone Vacuum Dryer (RCVD), Rotary Vacuum Paddle Dryer (RVPD), Ribbon Roster Cum Dryer
Pharmaceutical dryers. Various factors are considered in determining the correct type of dryer for any given application, including the material to be dried, drying process requirements, production requirements, final product quality requirements and available facility space
Type of Dryer we fabricate : As per client process demand we fabricate, fluidized bed dryers, rotary dryers, Atmospheric tray dryer, vacuum tray dryer, Fluid bed Tray dryer, Rotocone Vacuum Dryer (RCVD), Rotary Vacuum Paddle Dryer (RVPD), Ribbon Roster Cum Dryer, Pharmaceutical dryers. Our customers are spared across the world.
Other Products
